RTU_A_In_2SA_DspiSipsrc - Router Tunnel Mode AH Inbound 2 SA selection, Different SPI, Same IPsrc
Router
RTU_E_In_2SA_DspiSipsrc.seq [-tooloption ...] -pkt RTU_E_2SA_DspiSip.def -tooloption : v6eval tool option See also RTU_E_common.def and RTU_common.def
For details of Network Topology, see 00README
Set NUT's SAD and SPD as following:
(Link0) (Link1) NET4 NET2 NET0 NET1 HOST1_NET4 -- SG1 -- Router -- NUT -- HOST1_NET1 =====tunnel======> (SA1) =====tunnel======> (SA2)
Security Association Database (SAD) for SA1
source address | SG1_NET2 |
destination address | NUT_NET0 |
SPI | 0x1000 |
mode | tunnel |
protocol | AH |
AH algorithm | HMAC-MD5 |
AH algorithm key | 0123456789ABCDEF |
Security Association Database (SAD) for SA2
source address | SG1_NET2 |
destination address | NUT_NET0 |
SPI | 0x2000 |
mode | tunnel |
protocol | AH |
AH algorithm | HMAC-MD5 |
AH algorithm key | foo0foo1foo2foo3 |
Security Policy Database (SPD)
No SPD entry |
Tester Target Tester (Link0) (Link1) | | | |-------------------------->| | | ICMP Echo Request | | | From Host1Net4 | | | (using SA1) | | | | | | |-------------------------->| | | ICMP Echo Request | | | From Host1Net4 | | | | | | | |-------------------------->| | | ICMP Echo Request | | | From Host1Net4 | | | (using SA2) | | | | | | |-------------------------->| | | ICMP Echo Request | | | From Host1Net4 | | | | | | | v v v
ICMP Echo Request FromHost1Net4 using SA1 to Link0
IP Header | Source Address | SG1_NET2 |
Destination Address | NUT_NET0 | |
ESP | SPI | 0x1000 |
Algorithm | HMAC-MD5 | |
Key | 0123456789ABCDEF | |
IP Header | Source Address | HOST1_NET4 |
Destination Address | HOST1_NET1 | |
ICMP | Type | 128 (Echo Request) |
ICMP Echo Request FromHost1Net4 from Link1
IP Header | Source Address | HOST1_NET4 |
Destination Address | HOST1_NET1 | |
ICMP | Type | 128 (Echo Request) |
ICMP Echo Request FromHost1Net6 using SA2 to Link0
IP Header | Source Address | SG1_NET2 |
Destination Address | NUT_NET0 | |
AH | SPI | 0x2000 |
Algorithm | HMAC-MD5 | |
Key | foo0foo1foo2foo3 | |
IP Header | Source Address | HOST1_NET4 |
Destination Address | HOST1_NET1 | |
ICMP | Type | 128 (Echo Request) |
ICMP Echo Request FromHost1Net4 from Link1
IP Header | Source Address | HOST1_NET4 |
Destination Address | HOST1_NET1 | |
ICMP | Type | 128 (Echo Request) |
PASS: Both ICMP Echo Request (using SA1, SA2) received
perldoc V6evalTool
IPSEC.html IPsec Test Common Utility