RTU_A_Out_2SA_SspiDipdst - Router Tunnel Mode AH Outbound 2 SA selection, Same SPI, Different IPdst
Router
RTU_A_Out_2SA_SspiDipdst.seq [-tooloption ...] -pkt RTU_A_2SA_SspiDip.def -tooloption : v6eval tool option See also HTR_A_common.def and HTR_common.def
For details of Network Topology, see 00README
Set NUT's SAD and SPD as following:
(Link0) (Link1) NET4 NET2 NET0 NET1 HOST1_NET4 -- SG1 +- Router -- NUT -- HOST1_NET1 <==|=tunnel======= (SA1) NET6 | HOST1_NET6 -- SG2 + <====tunnel======= (SA2)
Security Association Database (SAD) for SA1
source address | NUT_NET0 |
destination address | SG1_NET2 |
SPI | 0x1000 |
mode | tunnel |
protocol | AH |
AH algorithm | HMAC-MD5 |
ESP algorithm key | 0123456789ABCDEF |
Security Policy Database (SPD) for SA1
tunnel source address | NUT_NET0 |
tunnel destination address | SG1_NET2 |
source address | NET1 |
destination address | NET4 |
upper spec | any |
direction | out |
protocol | AH |
mode | tunnel |
Security Association Database (SAD) for SA2
source address | NUT_NET0 |
destination address | SG2_NET2 |
SPI | 0x1000 |
mode | tunnel |
protocol | AH |
AH algorithm | HMAC-MD5 |
AH algorithm key | foo0foo1foo2foo3 |
Security Policy Database (SPD) for SA2
tunnel source address | NUT_NET0 |
tunnel destination address | SG2_NET2 |
source address | NET1 |
destination address | NET6 |
upper spec | any |
direction | out |
protocol | AH |
mode | tunnel |
Tester Target Tester (Link0) (Link1) | | | | |<--------------------------| | | ICMP Echo Reply | | | ToHost1Net4 | | | | |<--------------------------| | | ICMP Echo Reply | | | ToHost1Net4 | | | (using SA1) | | | | | | | | | |<--------------------------| | | ICMP Echo Reply | | | ToHost1Net6 | | | | |<--------------------------| | | ICMP Echo Reply | | | ToHost1Net6 | | | (using SA2) | | | | | | | | v v v
ICMP Echo Reply ToHost1Net4 to Link1
IP Header | Source Address | HOST1_NET1 |
Destination Address | HOST1_NET4 | |
ICMP | Type | 129 (Echo Reply) |
ICMP Echo Reply ToHost1Net4 using SA1 from Link0
IP Header | Source Address | NUT_NET0 |
Destination Address | SG1_NET2 | |
AH | SPI | 0x1000 |
Algorithm | HMAC-MD5 | |
Key | 0123456789ABCDEF | |
IP Header | Source Address | HOST1_NET1 |
Destination Address | HOST1_NET4 | |
ICMP | Type | 129 (Echo Reply) |
ICMP Echo Reply ToHost1Net6 to Link1
IP Header | Source Address | HOST1_NET1 |
Destination Address | HOST1_NET6 | |
ICMP | Type | 129 (Echo Reply) |
ICMP Echo Reply ToHost1Net6 using SA2 from Link0
IP Header | Source Address | NUT_NET0 |
Destination Address | SG2_NET2 | |
AH | SPI | 0x1000 |
Algorithm | HMAC-MD5 | |
Key | foo0foo1foo2foo3 | |
IP Header | Source Address | HOST1_NET1 |
Destination Address | HOST1_NET6 | |
ICMP | Type | 129 (Echo Reply) |
PASS: Both ICMP Echo Reply (using SA1, SA2) received
perldoc V6evalTool
IPSEC.html IPsec Test Common Utility