DAD Fail when NUT received Valid NS (dst MAC addr != MAC addr of NUT) on Stateless Link-local address autoconfiguration
Host and Router
DADFail_DADPostSendNS.seq -pkt LLOCAL_valNS_DiffMacAddr.def addrconf=boot
detail of parameters: see Test sequence for IPv6 Stateless Address Autoconfiguration.
init=none detail of Initialization: see Test sequence for IPv6 Stateless Address Autoconfiguration.
TN(or X) NUT ------------------------------ Initialize NUT (see INITIALIZATION)
Configure Link-local address of NUT by rebooting (addrconf=boot, see Addrconf phase)
TN wait the DAD NS sends from NUT <=== Judgement #1: DAD NS ==== name: dadns_from_NUT
Immediately (within $RetransTimerSec [sec]) send DAD Packet to force NUT to detect address duplication. ==== Action #1: DAD NS ====> name: dadpkt_to_NUT
Wait for NUT to finish DAD. (sleep $RetransTimerSec [sec])
Check if NUT's address is not configured ==== Action #2: DAD NS ====> name: chkconf_dadns_to_NUT
DAD NA does not come because NUT detect address duplicated and address is not configured. <=== Judgement #2: DAD NA does not come==== name: chkconf_dadna_from_NUT (or chkconf_dadna_from_NUT_rf1 if NUT is a Router)
Judgement #1. DAD NS must come from NUT on Link-local address autoconfiguration. name: dadns_from_NUT src: ::0 dst: solnode[NUT's tentative Link-local address] TargetAddress: NUT's tentative Link-local address
Action #1. Send DAD NS to force NUT to detect address duplication. name: dadpkt_to_NUT ether src: different as NUT's MAC address src: ::0 dst: solnode[NUT's tentative Link-local address] TargetAddress: NUT's tentative Link-local address
Action #2. Send DAD NS to check if NUT's address is not configured name: chkconf_dadns_to_NUT src: ::0 dst: solnode[NUT's Link-local address] TargetAddress: NUT's Link-local address
Judgement #2. DAD NA must not come from NUT because NUT detect address duplication. name: chkconf_dadna_from_NUT (or chkconf_dadna_from_NUT_rf1 if NUT is a Router) src: NUT's Link-local address dst: allnodes multicast TargetAddress: NUT's Link-local address OFlag: 1 RFlag: 0 ( if NUT is a Router then 1)
detail of v6eval tool option: see perldoc V6evalTool.pm, perldoc V6evalRemote.pm detail of parameters: see Test sequence for IPv6 Stateless Address Autoconfiguration.