DAD Success when NUT received no packet on Manual Global address configuration
Host and Router
DADSuccess_DADPostSendNS.seq -pkt GLOBAL0A0N.def addrconf=manual+_GLOBAL0A0N_UCAST init=DADSuccess_boot send=none
detail of parameters: see Test sequence for IPv6 Stateless Address Autoconfiguration.
init=DADSuccess_boot detail of Initialization: see Test sequence for IPv6 Stateless Address Autoconfiguration.
TN(or X) NUT ------------------------------ Initialize NUT (see INITIALIZATION)
Configure address of NUT (addrconf=manual+_GLOBAL0A0N_UCAST, see Addrconf phase)
TN wait the DAD NS sends from NUT
<=== Judgement #1: DAD NS ====
name: dadns_from_NUT
Immediately (within $RetransTimerSec [sec]) send strange DAD Packet to NUT to check if NUT ignore this.
==== Action #1: DAD NS ====>
name: dadpkt_to_NUT
Wait for NUT to finish DAD. (sleep $RetransTimerSec [sec])
Check if NUT's address is configured
==== Action #2: DAD NS ====>
name: chkconf_dadns_to_NUT
DAD NA come from NUT because NUT does not detect address duplication and address is configured.
<=== Judgement #2: DAD NA ====
name: chkconf_dadna_from_NUT (or chkconf_dadna_from_NUT_rf1 if NUT is a Router)
Judgement #1. DAD NS must come from NUT on Manual Link-local address configuration.
name: dadns_from_NUT
src: ::0
dst: solnode[NUT's tentative _GLOBAL0A0N_UCAST_ADDR]
TargetAddress: NUT's tentative _GLOBAL0A0N_UCAST_ADDR
Action #1. Send No Packet to NUT (NUT does not detect address duplication).
Action #2. Send DAD NS to check if NUT's address is configured
name: chkconf_dadns_to_NUT
src: ::0
dst: solnode[NUT's _GLOBAL0A0N_UCAST_ADDR]
TargetAddress: NUT's _GLOBAL0A0N_UCAST_ADDR
Judgement #2. DAD NA must come from NUT because NUT does not detect address duplication.
name: chkconf_dadna_from_NUT (or chkconf_dadna_from_NUT_rf1 if NUT is a Router)
src: NUT's _GLOBAL0A0N_UCAST_ADDR
dst: allnodes multicast
TargetAddress: NUT's _GLOBAL0A0N_UCAST_ADDR
OFlag: 1
RFlag: 0 ( if NUT is a Router then 1)
detail of v6eval tool option: see perldoc V6evalTool.pm, perldoc V6evalRemote.pm detail of parameters: see Test sequence for IPv6 Stateless Address Autoconfiguration.